|Product Name:||Waste Heat Recovery Boiler For Kiln||Type:||Vertical|
|Structure:||Water Tube||Boiler Capacity:||1T-10T|
|Application:||Glass Plant, Power Plant Boiler,Bolier System,Heat Recovery||Material:||Carbon Steel Or Stainless Steel,Boiler Steel,ND Steel|
waste heat recovery steam generator,
waste heat recovery boiler
Waste heat recovery boiler Steam Generator Exhaust Gas Boiler for Glass Kiln
Description of Waste Heat Boiler:
The waste heat boiler adopts forced circulation, that is, steam and water working fluid are driven by external force (feed water pump, hot water circulation pump) in the pipe. This can make the heating surface layout very compact and without any restrictions.
Heating surface of waste heat boiler consists of 2 parts economizer and evaporator. According to the calculation of heat balance of waste heat boiler, the single waste heat boiler should reach 6.0t/h steam output, and the waste heat boiler must set economizer section, and the feedwater absorbs the low and medium energy of exhaust gas. On the one hand, it can increase the feed water temperature and the steam output of the waste heat boiler; on the other hand, it can improve the effective utilization rate of the heating surface in the evaporator section.
In order to improve the heat transfer temperature and pressure of the economizer, the economizer section adopts a countercurrent arrangement, that is, the working medium and the exhaust gas flow direction are opposite, and the evaporator section is still arranged in a downstream flow.
In summary, a waste heat boiler is installed in the flue duct of the kiln tail to achieve the purpose of recovering waste heat of flue gas and protecting the environment. It is of great practical significance to effectively reduce energy consumption and promote the sustainable development of renewable energy.
The location of Waste heat boiler for Kiln
Under normal conditions, the waste heat boiler of kiln furnace locates in front of the flap valve in the main underground flue, and draws the hot flue gas from underground. After heat transfer and cooling in the waste heat recovery system, the temperature of flue gas is reduced from 260℃-300℃ to about 140℃-160℃. The flue gas is discharged into the reserved hole on the original chimney through the induced draft fan of the waste heat boiler outlet, and then discharge into the atmosphere through the chimney.
Benefits of Waste heat boiler for Kiln :
Waste heat boiler capacity :
Exhaust gas boiler (EGB) are offered in tailor-made capacities as per
Kaineng helps customer to choose the proper waste heat boiler model according to different requirements of various industry. Before delivery we will provide boiler drawings, auxiliary equipment drawings, foundation drawing, layout drawing, etc.
Kaineng keeps 24 hours online and keeps close contacts during the production process to ensure on time delivery with perfect finished product.
1. provide full range of original quality spare parts.
2. Kaineng offer project guidance service, we will dispatch engineers to your local project site to guide the installation and commissioning.
3. Our engineers will held a training for boiler workers to ensure the safe operation.
4. Free maintenance and repair for one year and lifelong service.
Contact Person: Mr. Wang
Tel: +86 15753230290